产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

通过一个由智能控制温度的加热板来焊接塑料件

网址:www.kskeber.cn  2019-11-13  作者:admin    阅读:

1、针对材质:PE、PP,尼龙、ABS等可塑性塑胶制品焊接.
1. Material: PE, PP, nylon, ABS and other plastic products welding
2、浮球、水球、弹力球、水晶球、洞洞球或各种玩具球等 3、汽车工业:车灯、水箱、保险杠、仪表盘、燃油箱、汽缸盖罩、前后组合灯散热护栅、通风管、遮阳板、洗衣机平衡环、蓄电池、蒸汽烫斗、汽车水箱等大型不规则塑胶的焊接。 4、其它:线绳、汽车马桶、吸尘器、大型栈板及其它大型不规则又必须水密、气密、高强度的塑胶部件。
2. Floating ball, water ball, elastic ball, crystal ball, hole ball or various toy balls, etc. 3. Automobile industry: welding of large irregular plastics such as lamp, water tank, bumper, instrument panel, fuel tank, cylinder cover, front and rear combined lamp heat dissipation fence, ventilation pipe, sunshade, washing machine balance ring, battery, steam and iron bucket, automobile water tank, etc 4. Others: ropes, car closets, vacuum cleaners, large pallets and other large irregular plastic parts that must be watertight, airtight and high-strength.
通过一个由智能控制温度的加热板来焊接塑料件。焊接时,加热板置于两个塑料件之间,当工件紧贴住加热板时,塑件接触面开始熔化,在预先设置好的加热时间完成之后,工件所要焊接表面的塑料将达到一定的熔化程度,此时工件离开热板,加热板自动移开,随后两片工件迅速在外界施压的前提下并合在一起,当达到一定的交冷却固化时间和焊接深度之后,整个焊接过程完成。
The plastic parts are welded by a heating plate with intelligent temperature control. During welding, the heating plate is placed between the two plastic parts. When the workpiece clings to the heating plate, the contact surface of the plastic part begins to melt. After the preset heating time is completed, the plastic on the surface to be welded by the workpiece will reach a certain degree of melting. At this time, the workpiece leaves the hot plate, and the heating plate will automatically move away. Then, the two pieces of workpiece quickly merge under the premise of external pressure, The whole welding process is completed after a certain curing time and welding depth.

返回新闻

转让电话
13313028229